ANALISA PENGARUH JENIS BAHAN, SUHU, DAN KECEPATAN TOOL EXPANDER TERHADAP DEFORMASI MATERIAL PADA PROSES TUBE EXPANDING
DOI:
https://doi.org/10.25047/jii.v14i2.59Abstract
Penelitian ini bertujuan untuk mengetahui pengaruh jenis bahan, temperatur, dan kecepatan tool expander terhadap deformasi plastis material yang terjadi pada proses Tube Expanding. Hasil pengujian menyatakan bahwa deformasi yang paling kecil terjadi pada material Baja Stainless Steel ASTM A 249 Grade 2 dan temperatur tube expanding yang paling optimal terjadi pada temperatur 89,6 derajat Fahrenheit. Sedangkan kecepatan tool expander yang paling optimal saat deformasi terjadi adalah 0,708 inch per second.
Tahapan-tahapan penelitian yang dilakukan adalah studi literatur berdasarkan penelitian terdahulu, mengambil data dari bagian Engineering dan Production Planning Control PT.BBI Pasuruan, melakukan simulasi pengujian dengan menggunakan Deform 3D, Â menganalisa data memakai Design Of Experiment Taguchi Method, serta menarik kesimpulan.
Hasil analisa dimanfaatkan sebagai bahan rekomendasi untuk perbaikan proses Tube Expanding di bagian Engineering dan Production Planning Control PT.BBI Pasuruan.
Downloads
References
Wuryandari, Triastuti, 2009, â€Metode Taguchi Untuk Optimalisasi Produk pada Rancangan Faktorial;Jurnal Media Statistika ;vol.2 no.2 FMIPA, UNDIP
Sularso, 1983, Dasar Perencanaan dan Pemilihan Elemen Mesin, PT.Pradnya Paramitha
Bagchi,TP, 1993.,â€Taguchi Method Explained ,Practical step to Robust Designâ€. Prentice ,Hall Of India Private Limited , New Delhi.
Montgomery, DC, 2005., “Design And Analysis Of Experimentsâ€,sixth edition ,John Willey and Sons Inc.,Singapore.
Ross.PJ. 1996.,â€Taguchi Techniques For Quality Engineeringâ€.,second edition., McGraw Hill Companies Inc.,New York.
Almeida., 2006.,â€Expansion and reduction of Thin walled tube using a Die :experimental and theoretical investigationâ€., Elsevier International Journal of Machine Tool and manufacture 46 .,1643-1652.
Shakeri., 2007., â€Expansion Of Circular Tubes by Rigid tubes as impact energy absorber :experimental and Theoritical investigationâ€.,Dept.Of Mechanical Engineeering of Amirkabir University of Technology.,Vol 12 No.5.Page 493- 501
Zukeri., 2010.,â€Studi On Cutting operation In Turning Process By 3D simulation Using Deform 3Dâ€.Faculty Of Mechanical and Manufacturing Engineering University Tun Husein Onn.
Uma Sakaran, 1992., “Research Methods for Business: A Skill Building Approach, second editionâ€, New York: John Wiley& Sons, Inc, page. 7-19.
Boothroyd.,G.,W.A.Knight.,1989.,â€Fundamenta of Metal Cutting and Machine Toolsâ€.New York.,Marcel Dekker Inc.
Bharati.,2012.,â€Analysis Of Tube End Formability of AA 2024 Tubes using FEMâ€.,Dept.Of Mechanical engineering,NITW,India,International Journal of current engineering and technology,Vol 2.No.1.
Downloads
Published
How to Cite
Issue
Section
License
Copyright Notice
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
