Development of Mini-Conveyor Trainer Kit based on Modbus Protocol
DOI:
https://doi.org/10.25047/tefa.v2i1.5920Keywords:
conveyor, PLC, modbusAbstract
This research focuses on the development of a Mini-Conveyor Trainer Kit designed for automation system education. The prevalent communication protocol in the industry is the Modbus protocol. Therefore, the mini conveyor controller is equipped with an RS485 module to enable communication via the Modbus protocol. The mini conveyor employs a DC motor and is controlled using an 8-bit microcontroller. By utilizing the Modbus protocol, the mini conveyor can be controlled through a PLC, simulating an industrial conveyor system. This approach provides a comprehensive understanding of automation systems to learners. The trainer kit aims to bridge the gap between theoretical knowledge and practical application in automation systems. The integration of the Modbus protocol allows for real-time control and monitoring, which are critical skills in modern industrial settings. Throughout this research, we detail the design and implementation process of the mini conveyor system, including hardware setup, microcontroller programming, and Modbus communication protocol configuration. Additionally, we conduct a series of tests to evaluate the system's performance, reliability, and response time when controlled via a PLC. The results demonstrate that the mini conveyor trainer kit successfully replicates the functionality of industrial conveyor systems, making it an invaluable tool for educational purposes. Learners can gain hands-on experience with industrial communication protocols and control systems, enhancing their understanding and preparedness for careers in automation and manufacturing industries. In conclusion, the development of this Mini-Conveyor Trainer Kit provides an effective educational tool that aligns with industry standards, thereby enriching the learning experience and equipping students with essential skills for the future.
References
[1] L. D. Burrow and S. Kilbane, “Design support for distributed industrial control,” in Advances in Software Engineering for PLC, 1993, pp. 6/1-613.
[2] D. W. Russell, “Integration of PLCs and databases for factory information systems,” in Systems Integration ’90. Proceedings of the First International Conference on Systems Integration, 1990, pp. 730–737. doi: 10.1109/ICSI.1990.138739.
[3] M. Q. Zaman and H. M. Wu, “Intelligent Motion Control Design for an Omnidirectional Conveyor System,” IEEE Access, vol. 11, pp. 47351–47361, 2023, doi: 10.1109/ACCESS.2023.3275962.
[4] N. Rothong, P. Chinakunwiphat, S. Chainoi, and B. Butsanlee, “Design of PLC-Integrated Object Detection for Categorizing Conveyor,” in 2023 Research, Invention, and Innovation Congress: Innovative Electricals and Electronics (RI2C), 2023, pp. 130–134. doi: 10.1109/RI2C60382.2023.10356010.
[5] S. Chakarborthy and A. Mehta, “Product Design of Semi Flexible Screw Conveyor.” [Online]. Available: www.iosrjournals.orgwww.iosrjournals.org
[6] R. Quijano, “Material Transport from Quarry to Plant by a Long Belt Conveyor System,” in IEEE Cement Industry Technical Conference, 1992, pp. 61–95. doi: 10.1109/CITCON.1992.687611.
[7] F. Zeng and Z. Y. Xie, “Coordinated Control System of Multi-Level Belt Conveyors for Promotion the Energy Efficiency Based on IoT-Technology,” in Proceedings - 2018 5th International Conference on Information Science and Control Engineering, ICISCE 2018, Institute of Electrical and Electronics Engineers Inc., Jul. 2018, pp. 675–679. doi: 10.1109/ICISCE.2018.00145.
[8] S. S. Nielsen, R. K. Holm, and P. O. Rasmussen, “Conveyor System With a Highly Integrated Permanent Magnet Gear and Motor,” IEEE Trans Ind Appl, vol. 56, no. 3, pp. 2550–2559, May 2020, doi: 10.1109/TIA.2020.2977877.
[9] L. Safari, G. Barile, V. Stornelli, and G. Ferri, “An Overview on the Second Generation Voltage Conveyor: Features, Design and Applications,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 66, no. 4, pp. 547–551, Apr. 2019, doi: 10.1109/TCSII.2018.2868744.
[10] N. Rodriguez-Perez, J. M. Domingo, G. L. Lopez, and V. Stojanovic, “Scalability Evaluation of a Modbus TCP Control and Monitoring System for Distributed Energy Resources,” in 2022 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), IEEE, Oct. 2022, pp. 1–6. doi: 10.1109/ISGT-Europe54678.2022.9960319.
[11] J. Luswata, P. Zavarsky, B. Swar, and D. Zvabva, “Analysis of SCADA Security Using Penetration Testing: A Case Study on Modbus TCP Protocol,” in 2018 29th Biennial Symposium on Communications (BSC), IEEE, Jun. 2018, pp. 1–5. doi: 10.1109/BSC.2018.8494686.
[12] W. Zhang, K. Chen, T. Yang, Y. Wang, C. Zhang, and Q. Zhang, “Data monitoring platform based on Modbus protocol,” in 2022 4th International Academic Exchange Conference on Science and Technology Innovation (IAECST), IEEE, Dec. 2022, pp. 754–758. doi: 10.1109/IAECST57965.2022.10061903.
[13] E. Pricop, J. Fattahi, N. Parashiv, F. Zamfir, and E. Ghayoula, “Method for authentication of sensors connected on Modbus TCP,” in 2017 4th International Conference on Control, Decision and Information Technologies (CoDIT), IEEE, Apr. 2017, pp. 0679–0683. doi: 10.1109/CoDIT.2017.8102673.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2025 M I Nari, Fendik Purnomo, S Kautsar, A Rofi'i, A W Winardi, N Afianah, S L Putri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
